tiled floor

Varnished Quarry Tiles Cleaned and Sealed in Formby

We were asked to take a look at these Quarry Tiles at a house in the Lancashire town of Formby near Liverpool. The tiles had been sealed with varnish but a polyurethane sealer like Varnish which forms a thin coat on the surface of the tile is easily scratched as you can see in the photograph below:

Varnished Quarry Tiles Cleaning Formby Before

Cleaning Quarry Tiles

To resolve the problem we had to strip off the Varnish coating from the Quarry tile using Tile Doctor Remove and Go which is especially designed for the safe removal of coatings from tile and stone. The product is diluted and spread over the floor allowing it to soak into the tile for around fifteen minutes before being scrubbed into the tile using a rotary floor scrubbing machine fitted with a black pad. The soiled solution is then washed off with clean water and extracted from the floor using a wet vacuum. There were some stubborn areas and these were tackled by repeating the process but this time with the addition of a steamer.

A stiff brush was also used in the grout lines and when we were completely satisfied with the condition of the floor it was given an thorough rinse using cold water. The wet vacuum was used again to remove the water and get the floor as dry as possible.

Varnished Quarry Tiles Cleaning Formby After Cleaning

Sealing Quarry Tiles

The floor was left to dry overnight and we came back the next day to seal the floor using four coats of Tile Doctor Seal and Go which will protect it going forward and it also adds a nice shine to the tile.

Varnished Quarry Tiles Cleaning Formby After Sealing

 

Quarry tile maintenance in Lancashire

Application of Anti-Slip Treatment at a Derbyshire Golf Club

I recently paid a visit to a Golf Club in Derbyshire to assist local Tile Doctor Steve Carpenter with the application of Anti-Slip treatment to the 6inch porcelain tiles in the men’s changing rooms. This is the advantage of being a member of a large network, if a fellow member needs assistance on a time consuming job they can just ask for assistance. In this case the floor was only around 12m2 but the Golf Club were hosting a Tournament later that afternoon and needed the work completing before 1pm.

Anti-Slip Preparation Derbyshire Golf Course

Cleaning Porcelain Tiles ready for Anti-Slip treatment

For best results the Anti-Slip treatment requires a clean surface so the first job was to give the tiles a thorough wash using Tile Doctor Pro-Clean worked into the floor with a rotary machine fitted with a scrubbing pad. The resultant dirty cleaning solution was then removed using a wet vacuum and the floor rinsed with clean water.

Applying Anti-Slip treatment to Porcelain tiles

The next step was to apply the Priming and Locking solution to the tile surface diluted one part solution to four parts water and this was left to dry. Once dry we applied the Anti-Slip treatment ensuring the tile was kept wet for up to 20 minutes in the process. The last step in the treatment was to re-apply the diluted Priming and Locking solution before the floor fully dried, it’s this last step that activates the treatment and locks it in place. There’s no need to wait for the floor to dry at this point it can be used immediately after the last step has been applied.

Anti-Slip Treatment Derbyshire Golf Course
To test the floor I invited the manager to try the floor dry and wet so he could experience the improvement in surface friction on a wet surface for himself. The treatment worked well and the manager was impressed, not only that we managed to complete the job with 45 minutes to spare.

For after care we recommend the floor should be cleaned daily by damp mopping with our Neutral Tile Cleaner, diluted at 35ml per 5-Litres of water periodically scrubbing the floor with a deck brush.

 

Surface Friction improvement at Derbyshire Golf Club

Polishing Marble Tiles in Kendal

We were recently asked to look at a polished Marble Tile installed in the floor of a house in Kendal, Cumbria. They were recently fitted but the local Tiler had struggled to get the sheen right on the surface of the Marble, in fact the sealer he had used was badly smeared in some places and needed to come off.

Mrs Bass Marble Floor Before Polishing

To strip off the sealer we used with a Red diamond encrusted burnishing pad fitted to a rotary machine and then rinsed the floor with water which we then removed using a wet and dry Vax machine. We then used other pads in the burnishing system process to clean and polish the Marble floor until we had a nice overall sheen. We finished off the floor with a coat of Tile Doctor Ultra-Seal, which is a premium, no-sheen, natural-look penetrating sealer formulated to provide maximum stain protection.

Mrs Bass Marble Floor After Polishing

 

Polishing Marble Tiled Floor in Kendal, Cumrbia

Scroll to top